Buy Now, Pay with Klarna.
Fiberglass Hardtop with grey finish for 2021-2024 Ford Bronco 4DR
Four-panel roof design, fits all 4-Door Broncos
2 panels over front seats, 1 panel over back seat and 1 rear section with glass & hatch. Rear hardtop panel features exterior side recesses to accept the optional Ford roof rack assembly.
Diamond stitched headliner incorporates 6 layers of material that includes foam, heat barrier and sound deadener to help reduce outside road noise improve cabin temperatures - May experience poor Sirius satellite radio reception and/or signal loss.
All inclusive; weather-stripping, tinted side glass, tinted rear window, wiper blade/motor/hose assembly, rear window defroster, strut rods and proper wiring harness to connect to the OE plugs.
Vacuum infused process with 8 layers of woven fiberglass cloth (4 on outer side & 4 on inner side) , temporary matte gray finish (requires pre paint prep).
Utilizes composite honeycomb inserts to provide added strength and durability for off-road environments.
Quarter locks and J-hooks to ensure optimal fitment for assembly and disassembly.
Tinted hatch glass and tinted side glass match OEM tinted glass. Wiper motor assembly mounted in lower OEM location; improved visibility.
Requires normal pre paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component. Additional pre paint materials may be required to achieve the desired finish.
We do not recommend installing/using any aftermarket partial soft top, partial mesh top, sunscreen top, etc. in conjunction with our hardtop due to possible interference issues.
Early production soft-top equipped Broncos may require additional parts From Ford to complete the installation.
Features & Benefits
Vacuum infused process with fiberglass cloth
OEM roof rack weight capacity; Dynamic (in motion) is 110 pounds, and Static (stationary) is 450 pounds.
Mounts with OE hardware (not included)
Estimated lead-time is 6 weeks, contact us for details
Product Notes
Estimated lead-time is 20 weeks, please contact us for details
Shipped only to commercial address via ground truck freight
Please be sure to review our Terms and Conditions before placing your order.
Link - Installation Instructions
Link - Noise/Alignment Fine Tuning Guide
California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm.
Four-panel roof design, fits all 4-Door Broncos
2 panels over front seats, 1 panel over back seat and 1 rear section with glass & hatch. Rear hardtop panel features exterior side recesses to accept the optional Ford roof rack assembly.
Diamond stitched headliner incorporates 6 layers of material that includes foam, heat barrier and sound deadener to help reduce outside road noise improve cabin temperatures - May experience poor Sirius satellite radio reception and/or signal loss.
All inclusive; weather-stripping, tinted side glass, tinted rear window, wiper blade/motor/hose assembly, rear window defroster, strut rods and proper wiring harness to connect to the OE plugs.
Vacuum infused process with 8 layers of woven fiberglass cloth (4 on outer side & 4 on inner side) , temporary matte gray finish (requires pre paint prep).
Utilizes composite honeycomb inserts to provide added strength and durability for off-road environments.
Quarter locks and J-hooks to ensure optimal fitment for assembly and disassembly.
Tinted hatch glass and tinted side glass match OEM tinted glass. Wiper motor assembly mounted in lower OEM location; improved visibility.
Requires normal pre paint prep; including sanding and primer. Occasional surface blemishes may be present as a result of the manufacturing process. These blemishes are removed during the normal sanding and preparation process required when painting any vehicle body component. Additional pre paint materials may be required to achieve the desired finish.
We do not recommend installing/using any aftermarket partial soft top, partial mesh top, sunscreen top, etc. in conjunction with our hardtop due to possible interference issues.
Early production soft-top equipped Broncos may require additional parts From Ford to complete the installation.
| SKU | AC-HT21FDBR4D-GF |
|---|---|
| Vehicle Year | 2024, 2023, 2022, 2021 |
| Vehicle Make | Ford |
| Vehicle Model | Bronco |
| Vehicle Trim | All |
| Vehicle Body Type | 4-Door SUV |
| Product Category | Hardtop |
| Composite Type | Fiberglass |
| Material/Finish | Unfinished |
| Pro Install | Minor adjustments may be necessary as part of the normal installation process. For the best possible fitment, we recommend having an expert install your product. Although some body shops have been in business for many years, they may not have sufficient experience in installing carbon fiber or fiberglass components. |
|
|